Topic: The bottling plant is fucking up.
Anonymous A started this discussion 6 years ago #98,904
I bought some lemon water from the store uptown a few days ago, it's a regular plastic bottle where the bottom of the lid is supposed to come off as you open it but it didn't. Same shit happened again with a cola that I bought downtown. That's some craycray.
Anonymous B joined in and replied with this 6 years ago, 1 hour later[^] [v] #1,116,139
What do you mean?
Anonymous C joined in and replied with this 6 years ago, 14 minutes later, 1 hour after the original post[^] [v] #1,116,144
Sounds like they need to adjust the clutches in the capper. It's also likely those bottles aren't sealed properly and shouldn't have made it past the height sensor, which also needs to be adjusted. Probably.
Anonymous A (OP) replied with this 6 years ago, 1 minute later, 1 hour after the original post[^] [v] #1,116,146
@1,116,139 (B)
You see the bottom part? It's supposed to come off and stay on the bottle when you open, two times within a couple of days apart. Whatever it is that's putting those things on them, it's fucking up.
You see the bottom part? It's supposed to come off and stay on the bottle when you open, two times within a couple of days apart. Whatever it is that's putting those things on them, it's fucking up.
Anonymous B replied with this 6 years ago, 36 seconds later, 1 hour after the original post[^] [v] #1,116,147
Anonymous A (OP) replied with this 6 years ago, 34 seconds later, 1 hour after the original post[^] [v] #1,116,148
@1,116,144 (C)That or someone is opening up those bottles in a strange way and putting something in them ?
Anonymous D joined in and replied with this 6 years ago, 4 minutes later, 1 hour after the original post[^] [v] #1,116,153
I got 99 problems but this isnt one of them.
Anonymous C replied with this 6 years ago, 18 seconds later, 1 hour after the original post[^] [v] #1,116,154
@1,116,148 (A)
Not really. The blade plates could be worn too. The bottle has a ring on it that the cap tightens against and if the bottle turns on the blade plates that are supposed to hold it still the lid can't be tightened properly. There's a lot of plastic shavings under the capper when that happens.
Not really. The blade plates could be worn too. The bottle has a ring on it that the cap tightens against and if the bottle turns on the blade plates that are supposed to hold it still the lid can't be tightened properly. There's a lot of plastic shavings under the capper when that happens.
Anonymous C double-posted this 6 years ago, 3 minutes later, 1 hour after the original post[^] [v] #1,116,158
Next time you grab a bottle, try to tighten the lid before you buy it. If you can tighten it then it's not sealed properly and you shouldn't drink it. You should also hear or feel the tamper band of the lid engage if you tighten it.
Anonymous A (OP) replied with this 6 years ago, 2 minutes later, 1 hour after the original post[^] [v] #1,116,160
@1,116,154 (C)
@previous (C)
> Next time you grab a bottle, try to tighten the lid before you buy it. If you can tighten it then it's not sealed properly and you shouldn't drink it. You should also hear or feel the tamper band of the lid engage if you tighten it.
Thank you, technician man? I'll do that.
You never know what minichan knows lol
@previous (C)
> Next time you grab a bottle, try to tighten the lid before you buy it. If you can tighten it then it's not sealed properly and you shouldn't drink it. You should also hear or feel the tamper band of the lid engage if you tighten it.
Thank you, technician man? I'll do that.
You never know what minichan knows lol
(Edited 35 seconds later.)
chill dog !!81dzJNNYL joined in and replied with this 6 years ago, 1 hour later, 3 hours after the original post[^] [v] #1,116,220
Anonymous C replied with this 6 years ago, 17 minutes later, 3 hours after the original post[^] [v] #1,116,249
@previous (chill dog !!81dzJNNYL)
If you buy a dud and go back for more, this is just a way to know to avoid that batch. Those bottles shouldn't make it to the packers, let alone the shelves.
If you buy a dud and go back for more, this is just a way to know to avoid that batch. Those bottles shouldn't make it to the packers, let alone the shelves.