Notice: You have been identified as a bot, so no internal UID will be assigned to you. If you are a real person messing with your useragent, you should change it back to something normal.
So I remember playing with Borax as a Teen cause it was dirt cheep and my Mom used in in the washer - I was building bombs rockets and fireworks and adding the stuff to the mix with poor results.
Today however if I were to use it - Wood be for a great shield from Neutrons from my Thermal Nuclear reactor (in planning stages only)
Anonymous F joined in and replied with this 9 years ago, 1 hour later, 11 hours after the original post[^][v]#788,540
Build a Homemade Nuclear Reactor
Cost: $3,500
Time: 2 Years
Itching for a challenging science project, two years ago Thiago Olson decided to build a small nuclear reactor. He had limited funds, limited space in his garage, and little engineering know-how. After all, he was only 15.
With a year of research and another of building, Olson pulled it off, joining a club of fewer than 20 amateurs in the world who are known to have created â€fusors,†tabletop machines that fuse atoms to produce energy. There´s no risk of a mushroom cloud-the machine creates barely enough energy to heat a cup of coffee, and radiation officials in Michigan (where Olson lives) have already deemed it safe.
How did he do it? Olson pored over graduate-level physics textbooks, studied vacuum-pump manufacturers´ manuals, and scoured the Web for cheap parts. Though mostly self-taught, he occasionally solicited advice on a fusion Web site. Once, he posted photos of a cheap photomultiplier tube he´d bought online because he had no idea how to rig it up. Another fusioneer on the site who had the same model promptly told him which wires went where. Amateur nuclear engineers are, it seems, a helpful bunch.
Now, his reactor up and running, Olson has turned to an even bigger challenge: college applications.
**HOW IT WORKS
**
Two vacuum pumps suck air out of the central chamber, leaving a near-total vacuum. Loose atoms in here interfere with fusion and lower yield.
The chamber is filled with deuterium and jolted with about 45,000 volts of electricity. A negatively charged grid of thin steel wires attracts the now-positive particles, sometimes causing them to collide.
Colliding particles fuse to form helium-3. The resulting neutron emission is measured, proving that fusion occurred.